2026 Exmark Lazer Z E-Series LRE730GKA524A3 For RENT Tishomingo MS

2026 Exmark Lazer Z E-Series LRE730GKA524A3

Highlights

location : Tishomingo, MS

availability : In Stock

Condition : New

year : 2026

make : Exmark

model : Lazer Z E-Series LRE730GKA524A3

color : Red

vehicle type : Lawn Mower

category : Zero-Turn Mower

RECENTLY VIEWED

info specifications

Discover the Exmark Lazer Z E-Series Mower
As the most affordable model in the Lazer Z line, the Lazer Z E-Series delivers an unbeatable combination of cut quality, productivity, durability and value. Select from 48-, 52-, or 60-inch UltraCut Series 4 cutting decks, all equipped with a newly redesigned discharge chute that distributes clippings over a wider area. A choice of twin-cylinder Kawasaki, Kohler, or Vanguard twin-cylinder commercial engines are available, all equipped with heavy-duty external air filters. Power is delivered through unitized Hydro Gear pump and motor units for up to 11 mph forward ground speeds. A new full-suspension operator seat increases operator comfort during long work days.

Unibody Frame
The Lazer Z E-Series utilize a one-piece unibody frame that delivers increased durability with fewer parts –– a classic case of “less is more”.

Less Time at The Pump
Lazer Z E-Series models feature a single 9.5-gallon fuel tank with a single fill location.

Ultracut Series 4 Deck
Built from formed and welded high-strength steel, UltraCut Series 4 full-floating decks feature maintenance free spindles with splined blade drivers to stop bolt tightening on impacts. The idler arm pivot bearings are also maintenance free.

Tool-less Belt Removal
The deck and hydro belts can be installed and removed without tools.

Reduced Maintenance
With just two annual grease points and maintenance-free sealed bearing spindles, the Lazer Z E-Series delivers maximum performance with minimum maintenance.

Lazer Z E-Series Model LRE730GKA524A3 at a Glance
Fuel Capacity - 9.5 gallon
Speed - 11 mph
Cutting Height Range - 1.5" - 5.5"
Coverage in Acres - 3 - 5
Acres Per Hour - 4.61

Features
4.61 Acres/Hour
52" Deck
Kawasaki V-Twin FX730V Engine
Full-floating UltraCut Series 4

Specifications

Equipment

Width / Cutting Deck	52"
UPC	193308242194
Drive	Hydro-Drive
Starter	Electric
Steering Control	Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Caster Forks	.50" thick caster yoke arms.
Front Caster Tires	13 x 6.5-6, smooth tread, pneumatic. Sealed Ball Bearings
Drive Tires	24 x 9.5-12, 4 ply Super Turf TL
Safety Package	Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Parking Brake	Lever actuated internal wet disc brake
Tractor Frame	Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade Spindles	No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Electrical	12-volt battery with 15-amp alternator.
Standard Features	Engine hour meter and cup holder
Seat	Deluxe suspension seat, foam flip-up armrests, and integral safety switch. Adjustment: Fore and aft fom Operators Position

Power Components

Engine Brand	Kawasaki
Transmission Brand	Hydro-Gear
Transmission Speeds	Infinitely Variable
Engine Model	FX730V
Engine Displacement	726cc
Speed	Infinitely variable speed selection from 0–11.0 mph forward, 0–6.0 mph reverse.
Engine Series	V-Twin
Fuel System	Carbureted
Transmission	Hydrostatic
Engine Spec	_S26
Engine Speed	3700 RPM
Air Filter	Heavy-duty canister air filtration system
Fuel Capacity	9.5-gallon single fuel tank with single fill location
Drive Description	Dual Hydro-Gear ZT-4400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Fuel Type	Gas Carbureted
PTO Engagement	MagStop Electromagnetic 175 ft-lb clutch with spot brake
Drive Wheel Release	Allows unit movement without engine running.
Fuel Indicator	Yes - Mechanical float
Deck Lift	Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Carb Compliant	No
ROPS	2-post foldable ROPS standard with seat belt and latch.

Decks

Deck Style	Floating Deck
Deck Style Description	Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction	10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt, and 7-gauge reinforcement plate welded to spindle mounting locations for improved strength.
Cutting Heights	1.5" to 5.5" in 0.25" increments
Blade Tip Speed	Approximately 18,500 fpm
Blades	3 blades at 18.00" length

Dimensions

Width	64.7"
Height	70.1"
Curb Weight	1019
Length	84.6"

Certain features may require an additional add-on package that may not be included in the retail or sale price. Please contact the dealership for full details.